autokeytransponder.cn
autokeytransponder.cn
Add to Cart
ETL PROGRAMMER
Item No. : p080
Product Weight : 1000.00g
The MC68HC705B16 programmer supports programming of Motorola 68HC05Bxx, 68HC05Xxx microcontrollers internal EEPROM - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers).
A parallel port interface (LPT1, LPT2) connects the programmer to any desktop PC running DOS or Windows systems.
The four jumpers located on the programmer board are intend for device type selection. Smart firmware controls all read/program operations so access to device can be establish even if device secured. Default settings permit to read and write Motorola MCU internal EEPROM without processor structure knowledge. The Device Menu displays all available functions to perform on the device ( read, program, verify, program security, etc...). A full screen editor is provided to view or edit any address of the programming buffer in binary or ASCII formats.
Hardware Specifications:
On-board device programming.
Parallel (Communication Port) port interface works on (LPT1, LPT2 )
Supported device table:
MC68HC705B16
MC68HC705B32
MC68HC705X16
MC68HC705X32
MC68HC05B68
MC68HC05B616
MC68HC05B632
MC68HC05X16
MC68HC05X32
The MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).
A parallel port interface (LPT1, LPT2) connects the programmer to any desktop PC running Windows 98/NT/XP.
The MC68HC908AZ60 Windows based software makes programming simple. Programmer has 2 interfaces : In-circuit and On-Board. In-circuit programming interface designed to allow fast access to MCU EEPROM resources. In this mode programmer automatically detects target MCU bus speed. On-Board programming interface is intended for full access to EEPROM/FLASH resources even if security sequence unknown. In this mode programmer automatically find out security sequence and store it. The Device Menu displays all available functions to perform on the device (read, program, verify, etc...). The MC68HC908AZ60 programmer can process 2 popular file formats - Motorola S-record and binary. A full screen editor is provided to view or edit any address of the programming buffer in binary or ASCII formats.
Supported device table:
MC68HC908AZ60 (2J74Y)
MC68HC908AZ60 (4J74Y)
MC68HC908AZ60A (3K85K)
MC68HC908AS60 (3J74Y)
MC68HC908AB32 (3K56G)
MC68HC08AZ60 (1J35D)
MC68HC08AZ32 (0J66D)
MC68HC08AZ32 (1H56A)
MC68HC08AS20 (0H94K)
MC68HC08AZ32A (1L52H)
MC68HC05H12 (0H57A) 4.19 MHz
MC68HC908AS60A (1L87J)
MC68HC05H12 (0H57A) 4.00 MHz
MC68HC08AB16A (0L72A)
• Communication with PC via a serial port
• Easy to use Windows 98/ME/XP software
• In-circuit/On-board EEPROM programming
• High Speed EEPROM Programming
• CONFIG Register Programming
• Pin tester in both operation modes
• Target MCU baud rate auto detection
• Onboard processor ATmega16 allow to Firmware Update to new versions
• 2 color LED indicates mode of operation, power supply status
• Additional items youll need to use this tool:
1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 port or USB port
2) Power supply: An 12 Volt / 500 mA
Supported device table:
MC68HC11 A8 (AB95T)
MC68HC11 A8 (C96N)
MC68HC11 A8 (D26E)
MC68HC11 E20(3E22B)
MC68HC11 E9 (1B60R)
MC68HC11 E9 (D82R)
MC68HC11 E9 (E22B)
MC68HC11 E9 (E28B)
MC68HC11 EA9(2D47J)
MC68HC11 F1 (2F37E)
MC68HC11 F1 (E87J)
MC68HC11 K1 (2D58N)
MC68HC11 K4 (1E62H)
MC68HC11 K4 (OE75J)
MC68HC11 KA4(1E59B)
MC68HC11 KS2(0H95B)
MC68HC11 KS4(0E57S)
MC68HC11 KS4(0F60M)
MC68HC11 P2 (2E74J)
MC68HC711 E20(1H19S)
MC68HC711 E9 (4K81H)
MC68HC711 E9 (5C47M)
MC68HC711 EA9(0D46J)
MC68HC711 K4 (K59D)
MC68HC711 PH8(0H30R)
MC68S711 E9 (5C47M)
XC68HC711 KS8(1H96P)
XC68HC711 P2 (1E53M)
The MC68HC912/9S12 programmer supports Motorola MC68HC912xx, MC9S12xx microcontrollers internal EEPROM and FLASH reading/programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers), and industrial products. A serial port interface (COM1... COM9) connects the programmer to any desktop or laptop PC running Windows 98/NT/XP.
The MC68HC912/9S12 programmer Windows based software makes programming simple. Programmer has 2 interfaces: In-circuit and On-Board. In-circuit programming interface designed to allow fast access to MCU EEPROM and FLASH resources. In this mode programmer automatically detects target MCU bus speed. On-Board programming interface is intended for full access to EEPROM/FLASH resources even if target MCU secured or BDM locked. Also EEPROM/FLASH erase/programming protection are take off. The Device Menu displays all available functions to perform on the device (read, program, verify, etc...). The MC68HC912/9S12 programmer can process 2 popular file formats - Motorola S-record and binary. A full screen editor is provided to view or edit any address of the programming buffer in binary or ASCII formats.
Supported device table:
MC68HC912 DC128A (3K91D)
MC68HC912 DC128 (0K50E)
MC68HC912 DG128 (5H55W)
MC68HC912 DG128A (3K91D)
MC68HC912 DG128 (0K50E)
MC68HC912 D60A (2K38K)
MC68HC912 D60 (0K75F)
MC68HC912 D60 (0K13J)
MC68HC912 D60 (4F73K)
MC68HC912 B32 (4J54E)
MC68HC912 B32 (9H91F)
MC9S12 D64 (2L86D)
MC9S12 DG128B (0L85D)
MC9S12 DT128B (0L85D)
MC9S12 A128B (0L85D)
MC9S12 DB128B (0L85D)
MC9S12 DT128B (1L85D)
MC9S12 H128 (1K78X)
MC9S12 DT128B (3L40K)
MC9S12 DG256C (2K79X)
MC9S12 DT256C (2K79X)
MC9S12 DP256C (2K79X)
MC9S12 H256 (1K78X)
MC9S12 DP512 (1L00M)